Good to see you!
Otherwise login by email.
Welcome to Dulux
Otherwise login by email.
Terms & Conditions
Registration complete
Successfully registered, please login
Registration complete
Forgotten your password?
Please enter email address associated to your account
Change Password
Password changed successfully.
Request sent!
For more tailored inspiration, please fill in the 3 questions below.
You need to answer all of the questions before submitting.
Thanks for registering
We will sent you colourful news every now and then

Weathershield
Your Measurements:
Amount Needed:
For the best result we recommend to use
{coatAmount} for {productTitle}
-
Finish Matt | Gloss
-
Coverage 10-12 m²/L per coat
-
Drying Time 1 to 2 hours
-
Coats 2
-
Protects against UV and heat (up to50°C), colour fading and condensation
-
Dirt and dust resistance
-
Make house up to 5°C cooler
-
Good alkali resistance
-
Resists peeling and flaking
-
No added lead & mercury
-
Low odour & low VOC
Product Description
Dulux Weathershield is a high performance exterior paint for all-weather and colour protection to keep homes beautiful and looking new for longer. Protect walls for 5 years against extreme weather conditions (of up to 50°C), colour fading and condensation. Outstanding Weathershield durability enhanced with strong dirt and dust resistance lowers repainting frequency and maintenance cost. It also lowers energy cost by reflecting heat and reducing surface temperature by up to 5°C.
Application Description
Apply with roller, brush or spray
Health & Safety
Keep out of the reach of children, away from food, drinks and animal feed. Avoid contact with skin or eyes. Wear eye/hand protection. Do not breathe vapour/spray. Use only in well ventilated areas. Dry sanding, flame cutting and/or welding of the dry paint film will give rise to dust and/or hazardous fumes. Wet [sanding]/[flatting] should be used wherever possible. If exposure cannot be avoided by the provision of local exhaust ventilation, suitable respiratory protective equipment should be used. Remove as much paints as possible from brushes and rollers before cleaning. Store in a cool and shaded place. Container must be in a secure, upright position and be tightly closed. Do not use empty container for storing food. If swallowed seek medical advice immediately and show this container or label. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. In case of contact with skin wash immediately with soap and water or a proprietary skin cleanser. Do not use solvents or thinners. Avoid release to environment. Do not empty into drains or water course. Dispose of used container in compliance with local regulation.
Tips & Advice
-
1. Preparing the SurfacesFor Exterior Masonry Surfaces
Ensure the surface to be painted is clean, dry and free from any defects, dirt, grease or wax. Treat any areas affected by mold, lichens, algae and moss with fungicidal treatment. Please refer to the technical data sheet for further application guidance. Suitable for all normal exterior wall and masonry surfaces.
How much paint do I need?
Measure the height and length of the surface you want to paint (in metres or centimetres).


Your Measurements:
{{!-- This value will be injected with JavaScript --}}
Amount needed:
{{!-- This value will be injected with JavaScript --}}
This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.